Archive for category Radio Reviews

GAP 20m Monogap Vertical Dipole Review

I’ve been setting up a small trailer for use as a mobile, independently powered radio station for use at HF and VHF. To that end, it has its own deployable solar panels, internal power storage, and dedicated power conversion electronics. There are quite a few 12.6 VDC VHF and HF radios out there, and I own several, so the radios are less of a problem than a situation where I have to make some kind of fun decision between multiple good options.

VHF antennas are no problem. But the HF antenna… There’s the rub. If it’s to be truly portable, that means it cannot be large, and it will not be high in the air. Those are very significant drawbacks for most antenna systems; they directly impact both receive and transmit performace. So I went hunting. Eventually, I happened upon the Monogap 20 meter antenna, which is a vertical dipole; easily portable within the frame of reference of what can be safely transported in the bed of my pickup, light, easily mounted and unmounted, inexpensive, and — as it turns out — a surprisingly good performer.
Read the rest of this entry »

Tags: , , , , , , , , , , , ,

ICOM IC 7300 Transceiver Review

The

IC-7300

IC-7300

ICOM IC 7300 marks an important inflection point for the “big three” amateur radio manufacturers: The beginning of true software-defined RF processing from one end to the other.

As the first full SDR transceiver from “the big guys”, it is interesting to consider the price point, feature set, and performance both in light of the legacy analog designs, and as compared to what SDRs are known to be capable of.
Read the rest of this entry »

Tags: , , , , , , , , , ,

Kenwood TS-990S Review

ts990sI’ve been operating the Kenwood TS-990S for some months now, so it’s about time I actually review it. This review reflects operation under firmware 1.05 as downloaded from the Kenwood website.

Because there have been a number of reviews that have done an excellent job of enumerating the radio’s features, I’m going to come at this differently. I’m going to first give you an overview of how well I think it operates and how comfortable I’ve become (or not) with its features, along with an assessment of its value with regard to its capabilities. I’ll note a few things that seem unique to me, standout features that are really special from the operations standpoint.

Then I’m going to lay out, in detail, the critiques I have of the radio from an operating point of view — that’s something no one has really gone into as far as I know, and I hope you’ll find it useful. I even nurse a vague hope that Kenwood will, via Google-fu or some kind soul, find this and take some of my ideas to heart, because I really do think the radio could be significantly improved with just a firmware upgrade (or several.)
Read the rest of this entry »

Tags: , , , , , ,

Yaesu FTDX-3000 Review

FTDX-3000I added the FTDX 3000 to my station in order to use it differently than most users will; my setup uses the transmit portion of the radio as usual, but utilizes the IF output on the rear deck to replace most of the receive capability with an SDR on the IF, and my SdrDx software working with the SDR. This works as planned, and so I am well satisfied with the radio in my installation. I get a far superior receive capability to any traditional radio on the market at any price including the very best from Yaesu, Kenwood and ICOM, *plus* the radio’s own capabilities as a medium quality second receiver in-band if I want that. I did my research, I got what I asked for, and I am happy as a clam. Also, confirmation bias, lol. But…
Read the rest of this entry »